BA Finish 410S Stainless Steel Sheet 0.3-2.0mm 1260mm Wide

BA finish 410S stainless steel sheet 0.3-2.0mm 1260mm wide

product description

410S stainless steel is a martensitic stainless steel sheet

Chemical composition:

Carbon (C) content ≤ 0.08%, which helps to improve the hardness and strength of steel, but too high carbon content may reduce the toughness and corrosion resistance of steel.
Manganese (Mn) content ≤ 1.00%, which can improve the strength and hardenability of steel.
Silicon (Si) content ≤ 1.00%, which can enhance the oxidation resistance and corrosion resistance of steel.
Chromium (Cr) content is 11.5 - 13.5%, which is the main element of stainless steel with corrosion resistance. The higher the chromium content, the better the corrosion resistance.
Nickel (Ni) content ≤ 0.60%, nickel can improve the toughness and corrosion resistance of steel, but the content is low in 410S.
Phosphorus (P) content ≤ 0.04%, sulfur (S) content ≤ 0.03%, phosphorus and sulfur are impurity elements in steel, the lower the content, the better the quality of steel.

Features:

Good corrosion resistance:
In general environments, such as air, water and some mildly corrosive media, it has good corrosion resistance. However, in highly corrosive environments, its corrosion resistance may not be as good as some high-alloy stainless steels.
Good machining performance:
It is easy to perform machining operations such as cutting, stamping, bending, etc., and can meet the processing requirements of various complex shapes.
High hardness:
After proper heat treatment, the hardness is high, up to about HRC 40-50, which makes it have good wear resistance and deformation resistance.

Uses:

Architectural decoration field:
It can be used to make curtain walls, roofs, balcony railings, etc. of buildings, which are both beautiful and can meet certain corrosion resistance and strength requirements.

Kitchen equipment:
Such as kitchen utensils, sinks, stoves, etc., because it has good corrosion resistance and easy processing, and the cost is relatively low.

Automotive industry:
It is used to manufacture some automotive parts, such as exhaust pipes, decorative strips, etc. In the automotive industry, 410S stainless steel sheets can meet certain strength and corrosion resistance requirements, and have good forming properties, which is convenient for manufacturing various complex shapes of parts.

Chemical equipment:
Because of its certain corrosion resistance, it can be used to manufacture some parts in chemical equipment, such as pipes, containers, etc.

Stainless Steel Plate Standard Stock Sizes:

1260 x 2438 mm
1250 x 3000 mm
1000 x 3000 mm
1250X1500 mm
1500X3000 mm

Technical Parameters